Spool-Lock Solenoids
Home : Electro Hydraulic Products : Spool-Lock Solenoids
Printer-friendly version
  PRINT
Spool-Lock Solenoids
custom
Spool-Lock Reference Designs

Configure this product and compare it with others using our Product Catalog

  • Submersible design to seal against water ingression, with a protection rating up to IP-X7
  • Rated Voltage: 12 or 24 VDC ± 10%
  • Rated Current: 0.77 Amps (12 VDC) ;0.39 Amps (24 VDC)
  • Temperature Range: -30°C to +90°C
  • Force of locking/holding pin in extended position: De-energized position: 0.41 lbs. [1.82 N]
  • Working Stroke: 3.6 mm (0.14 in.)
  • Locking/holding pin diameter: 6.35 mm (0.25 in.)
  • Duty cycle: 100% continuous
  • Recommended torque: 40 ft-lbs (54.23 N-M) Maximum torque 45 ft-lbs (61.1 N-M)
  • RoHS Compliant
  • Durable construction insures operation in severe temperature conditions
  • Can be mounted directly without the need for additional hardware
  • 9/16-18 UNF-2A mounting thread standard with other threads available on request

custom
Totally Custom

Click here to ask MSA for additional information about Totally Custom Spool-Lock Solenoids.

In customer applications where the performance, mounting, or other uniquely demanding technical requirements cannot be met by modifying our standard spool-lock solenoid, Magnet-Schultz of America can provide a totally custom spool-lock design.

Typical design features which can be tailored to meet the customer's requirements are:

  • Stroke
  • Internal pressure ratings
  • Mating threads
  • Manual actuation
  • Different connectors/terminations, and lead wire lengths

Increased user safety and system reliability are important benefits of Spool-Lock solenoids by Magnet-Schultz of America. This variant on the well known shot bolt solenoid is intended for hydraulic applications, and is pre-threaded for screwing into a standard hydraulic manifold. When activated, the spool-lock solenoid’s actuator locks firmly in place, and will not change its state unless authorized by a subsequent electrical input. Commonly found on boom lifts and other types of aerial work platforms, the presence of spool-lock solenoids creates assurance that a sudden change in solenoid state will not cause a dangerous change in a worker’s position.